Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers https://en.m.wikipedia.org/wiki/Bungalow • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers, • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
Additional construction requirements BCA Part 3.10
Additional construction requirements BCA Part 3.10. • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers https://en.m.wikipedia.org/wiki/Bungalow • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers.
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers
• AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers • AS 4055 Wind loads for housing This Standard is used for residential buildings with maximum height of 8.5 metres, building width of 16 metres and maximum roof pitch of 35 °. • AS 1170.2 Structural design actions - Wind actions . Wind classification of building sites . This system ensures that all buildings will be exposed to approximately the same level of risk of wind damage. Designers